Hits：3241          Date：2016-10-11 10:08:04

Large diameter polyethylene PE pipe production line.

Large Caliber HDPE Pipe Extrusion Line
 
Key words
Large caliber PE pipe extrusion line
Large diameter PE pipe extrusion line
HDPE solid wall pipe extrusion line
 
 
HDPE Solid wall Pipe Advantages
Reference Standard:  DIN 8074-1999, SDR41-SDR11, PE100,PE80,PE63
1.HDPE is non-toxic, with no heavy metal additives. The HDPE pipe won’t attract dirt or contaminated by microorganism, and is resistant to chemical or electron chemical corrosion.
2.It’s solid wall structure allow it to withstand high pressure, making it ideal for pressure application like water and gas supply.
3.It’s light weight and ease of installation can reduce installation costs by as much as 50% compare to metal piping system
4.Higher Flow Capacity: smooth interior walls result in lower pressure loss and higher volume than metal pipe
5.Longevity: more than 50 years under proper use
6.Recyclable and Environment-friendly
Main technical characteristics of Shuanglin HDPE Pipe Extrusion Line:
 SHUANGLIN combined the advanced technology and digestion to prompt this HDPE water supply pipe and gas pipe production line. Its unique structure design and high efficiency performance makes it fast accepted by the pipe factories.
The extrusion line consists of high efficiency single screw extruder, vacuum calibration, spraying water cooling tank, multi-claw haul-off machine, planetary cutting machine , pipe stacker and trolley.
It adopts PLC control system and HMI for whole extrusion line, synchronization function realized, as well as the winding machine. It helps the group machine production management and quality control.
     This HDPE Pipe production line utilize highly efficient large capacity single screw extruder, vacuum sizing tank, spray cooling tank, various multi-band trackers, planetary cutting machine, and  finished products stacker, equipped with spiral or basket extrusion mold.
       With appropriate exchange of certain units, the production line can realize two or three layer co-extrusion of dual resistance pipe. Co-extruded layers of pipe wall have uniform thickness. The inner and outer layer use dual resistance material (flame retardant, anti-static, etc), while the core layer using ordinary HDPE. this way it greatly reduces the amount dual resistance material used , and thereby reducing the cost of dual resistance pipe.
    This Pipe Extrusion Line adopts PLC control system, human-machine interface(MHI), easy to operate,  function auto-synchronize.
 
Main technical parameters of HDPE Pipe extrusion Line：

Type	Pipe size (mm)	Extruder model	Maximum speed （m/min)	capacity (kg/h)	Total power (kW)	Total length (m)
SLPE-32G	Ф16～Ф32	SJ65/33	30	220	120	50
SLPE-63	Ф16～Ф63	SJ65/33	15	180	100	40
SLPE-110	Ф75～Ф110	SJ65/33	8	220	130	45
SLPE-160	Ф75～Ф160	SJ75/33	6	280	150	45
SLPE-250	Ф110～Ф250	SJ75/33	4	300	180	50
SLPE-315	Ф110～Ф315	SJ90/33	3.6	400	260	50
SLPE-500	Ф315～Ф500	SJ90/33	1.6	500	340	55
SLPE-630	Ф315～Ф630	SJ120/33	1.1	800	480	65
SLPE-800	Ф500～Ф800	SJ120/33	0.9	1000	580	70
SLPE-1200	Ф630～Ф1200	SJ150/34	0.6	1200	800	75
SLPE-1600	Ф800～Ф1600	SJ150/34C	0.36	1500	920	90